EV CHARGER REPLACEMENT IN LONGVIEW, TEXAS
When an outdated or broken EV charger is beyond economical repair, we provide safe disconnection, electrical panel load verification, and replacement with modern high-speed 48A hardwired chargers across Longview, TX.
WHAT IS EV CHARGER REPLACEMENT & UPGRADE?
EV Charger Replacement & Upgrade is a full-service electrical replacement program. Older Level 1 chargers (1.4 kW) or early 16A/32A Level 2 chargers take 12 to 24 hours to charge modern large-battery electric vehicles (EVs with 80 kWh to 135 kWh battery packs).
Replacing obsolete or fried charging units with a hardwired 48A (11.5 kW) Level 2 wall box cuts charge time by up to 60%, delivering 35 to 45 miles of range per hour charged.
WHAT DOES EV CHARGER REPLACEMENT INCLUDE?
SAFE DE-ENERGIZATION
Testing & shutting off breaker power before safely unmounting old wall box hardware.
CONDUCTOR GAUGE AUDIT
Verifying wire gauge (e.g. 6 AWG copper for 60A circuit / 48A charging speed).
HARDWIRE CONVERSION
Removing failure-prone NEMA 14-50 outlets to hardwire directly for maximum reliability.
NEW WALL BOX MOUNTING
Anchoring new wall box unit securely to wall studs with heavy-duty lag bolts.
COMMISSIONING & APP SETUP
Configuring internal DIP switches or Wi-Fi commissioning for max amperage limits.
FULL CHARGING LOAD VERIFICATION
Testing initial vehicle plug-in & monitoring amp draw for 30 continuous minutes.
REPAIR VS REPLACEMENT DECISION MATRIX
- Replace when: Internal mainboard is burned or showing arc flash soot.
- Replace when: Wall box housing is cracked or water ingress damaged internal transformers.
- Replace when: Unit is a legacy 16A or 32A charger and you upgraded to a newer EV.
- Repair when: Fault is limited to a damaged cable, loose terminal, or bad outlet.